• Unplug the washing machine from the electrical outlet for 60 seconds, then plug it back in to perform a hard reset• Verify your home's circuit breaker for the laundry room has not tripped; reset if necessary• Check that both hot and cold water supply valves behind the washer are fully open (turn counterclockwise)• Inspect both inlet hoses (hot and cold water lines) for kinks, twists, or damage; straighten any bent sections• Confirm you are using HE (High Efficiency) detergent if your Amana model requires it, and use only the recommended amount• Remove and inspect the inlet hose screens for mineral deposits or debris; rinse with warm water if clogged• Check the drain hose for kinks, blockages, or improper installation; ensure it is not siphoning water• Verify the washing machine is sitting level on the floor using a bubble level; adjust feet if tilted• Run a cleaning cycle with a commercial washing machine cleaner designed to remove mineral buildup• Unplug the machine and check all visible wiring connections to the control board for looseness (do not attempt to disassemble panels)
