• Unplug the washing machine from the 120V outlet for 60 seconds, then plug it back in to perform a complete reset• Check your home's circuit breaker panel to ensure the breaker for the washer outlet is not tripped; flip it OFF then back ON if needed• Verify both hot and cold water supply shut-off valves behind the washer are fully open (turned counterclockwise)• Inspect both inlet water hoses for kinks, twists, or bends that could restrict water flow• Confirm the drain hose is not clogged by running water through it manually over a sink• Check that the washer is sitting level on the floor using a spirit level; adjust the leveling feet if needed• Ensure you are using the correct detergent type (HE high-efficiency detergent for HE models, or standard detergent for conventional models)• Listen for water filling sounds when starting a cycle; if no water enters, the inlet valves may be blocked• Review your Amana washer's manual for the correct water level sensor location and verify no visible debris is present around it• Power cycle the machine by unplugging it for 2-3 minutes rather than just using the power button• If the error clears after a reset but returns, document when it happens to help a technician diagnose the issue
