• Verify that your home circuit breaker for the oven is in the ON position; if tripped, switch it OFF then back ON• Ensure the oven door closes completely and latches properly with no gaps or obstruction• Allow the oven to cool for at least 30 minutes, then attempt to reset by turning the power circuit breaker OFF for 60 seconds, then ON again• Check that no cooking mode buttons are stuck or held down on the control panel• Verify the oven is receiving proper 240V power (for electric models) or 120V ignition power (for gas models) by testing another appliance on the same circuit• Examine the oven interior visually for any loose wires, debris, or obvious damage near the back wall where the temperature sensor is typically located• Perform a factory reset by pressing and holding the control panel's reset button (if available) for 5-10 seconds• If error persists after these checks, do not attempt further repairs—contact a certified Amana service technician for sensor and control board diagnostics
