• Check that your home's circuit breaker for the oven is in the ON position; if it tripped, switch it OFF then back ON• Ensure the oven door closes completely and the door latch engages properly, as incomplete closure can trigger sensor errors• Verify the oven control panel settings are correct and no unusual buttons are being held down• Unplug the oven or turn off its dedicated circuit breaker and wait 60 seconds, then restore power to reset the control board• Allow the oven to cool completely (at least 2-3 hours) before attempting to use it again• Check that no visible damage or discoloration is present on the oven's exterior near the temperature sensor area• Verify that your home has adequate 240V (or 120V if applicable) power supply and that no other major appliances are running simultaneously causing voltage drops• If error persists after these steps, contact a certified Amana technician or your service provider, as the sensor or control board will require professional replacement
