Home — Locations

Amana Freezer Error Code IT

The IT error code indicates a problem with the interior temperature sensor or a failure in the freezer's ability to maintain proper freezing temperatures. This error typically suggests the appliance cannot accurately read or regulate internal temperature conditions.

Common Symptoms

• Freezer not reaching proper freezing temperatures • Food thawing or becoming soft when it should be frozen • Display showing IT error code • Compressor running continuously without cycling off • Ice accumulation or frost buildup in unusual patterns • Audible alarm or warning sounds from the freezer • Temperature control buttons becoming unresponsive

Possible Causes

• Faulty or disconnected temperature sensor (thermistor) in the evaporator coil • Defrost system malfunction preventing proper airflow • Blocked air vents restricting cold air circulation from evaporator to freezer compartment • Damaged or pinched defrost drain line causing ice backup • Control board communication failure with temperature sensor • Freezer coils frosted over due to defrost cycle failure • Loose or corroded wire connections to temperature sensor • Failed damper control that regulates airflow between fridge and freezer sections

Safety Checks You Can Do

• Unplug the freezer from the wall outlet, wait 60 seconds, then plug it back in to reset the control board • Inspect the door seal gasket for cracks, tears, or improper seating; ensure the door closes completely with no gaps • Check that the freezer vents inside the unit are not blocked by food items or frost buildup • Verify the temperature setting is not set to the warmest position; adjust to recommended freezing temperature (0°F or -18°C) • Ensure there is at least 2-3 inches of clearance on all sides of the freezer for proper air ventilation around the condenser coils • Look behind and underneath the freezer for any visible ice accumulation or water pooling that might indicate a drainage problem • Listen for the defrost cycle running (typically a brief humming or clicking sound) to confirm the appliance is attempting temperature regulation • Verify the freezer is not in demonstration or service mode by checking the control panel settings

Amana Freezer Error Code IT

Common Symptoms

Possible Causes

Safety Checks You Can Do

Need More Help?