Home Locations

Amana Trash Compactor Error Code Er

The Er error code indicates a motor load or compaction cycle fault on your Amana trash compactor. This error typically means the motor is experiencing excessive resistance or has failed to complete the compaction cycle properly.

Common Symptoms

• Compactor will not start or complete a cycle • Motor runs but does not compress trash effectively • Loud grinding or unusual noises during operation • Drawer gets stuck or will not open after cycle • Error code Er displays on the control panel • Compactor stops mid-cycle without completing compression

Possible Causes

• Trash load exceeds maximum capacity or weight limit • Foreign objects (glass, metal, hard items) jamming the ram or compaction chamber • Motor bearing failure or mechanical jam in the compaction mechanism • Door latch switch malfunction preventing proper door closure detection • Worn or damaged compaction ram or drive belt • Excessive power supply fluctuations or electrical fault in motor circuit • Control board failure preventing proper motor signal

Safety Checks You Can Do

• Unplug the trash compactor from the electrical outlet for 60 seconds, then plug back in to reset the control board • Ensure the compactor drawer is fully closed and latches completely with an audible click • Remove the drawer and visually inspect the compaction chamber for any visible obstructions, glass shards, or metal objects • Check that the trash load does not exceed the fill line marked inside the bin • Verify the power outlet is functioning properly by plugging in another appliance • Remove any overstuffed items and limit trash to recommended capacity levels • Ensure nothing is blocking the compactor drawer from opening or closing smoothly • Listen for unusual grinding sounds that might indicate internal jamming

Need More Help?

Our support team is available 24/7 to assist you with any technical issues