Home — Locations

Amana Refrigerator Error Code E1

Error code E1 on Amana refrigerators indicates a temperature sensor malfunction or failure in the refrigerator compartment. This error prevents the unit from accurately reading and maintaining proper cooling temperatures, which can lead to food spoilage and unsafe food storage conditions.

Common Symptoms

• Refrigerator compartment not cooling properly or cooling inconsistently • Freezer section may be working normally while fridge section struggles • Error code E1 displayed on the digital control panel • Interior temperature rises above safe food storage levels (above 40°F) • Compressor running continuously or cycling irregularly • Frost buildup or ice formation in unusual locations • Food items thawing or becoming warm despite appliance running

Possible Causes

• Faulty refrigerator compartment temperature sensor (thermistor) requiring replacement • Loose or corroded wire connection at the temperature sensor • Control board failure preventing proper sensor signal interpretation • Damaged sensor wiring due to age, vibration, or rodent damage • Sensor positioned incorrectly allowing inaccurate temperature readings • Power supply voltage fluctuation affecting sensor calibration on 120V/60Hz system • Moisture or condensation damage to sensor electronics • Manufacturing defect in the sensor assembly

Safety Checks You Can Do

• Verify the refrigerator is plugged firmly into the wall outlet and the outlet has power • Check that your home circuit breaker has not tripped; reset if necessary • Confirm the refrigerator doors are closing completely and seals are not torn or damaged • Ensure the refrigerator temperature setting is not set to the warmest position • Verify air vents inside the refrigerator compartment are not blocked by food or containers • Check that the condenser coils on the back of the unit are not clogged with dust • Inspect the fresh air damper control (if equipped) to ensure it is functioning and not stuck • Replace the air filter if your model has one, as a clogged filter can affect cooling performance • For models with water dispensers, verify the water supply line is not kinked or frozen • Unplug the refrigerator for 60 seconds, then plug it back in to perform a complete reset • Allow 30 minutes after plugging back in for the system to stabilize before checking for error code recurrence • Note the exact time and conditions when E1 appears to help identify if it is intermittent

Amana Refrigerator Error Code E1

Common Symptoms

Possible Causes

Safety Checks You Can Do

Need More Help?