• Check your home's circuit breaker panel to confirm the breaker serving the dishwasher has not tripped; reset it by switching it fully OFF then back ON if needed
• Verify the dishwasher's power cord is fully plugged into the wall outlet and the outlet has no visible damage
• Test the outlet by plugging in another small appliance (such as a lamp) to confirm the outlet is functioning properly
• Unplug the dishwasher from the wall outlet or turn OFF its dedicated circuit breaker for 60 seconds, then restore power to perform a full reset
• Check that no other high-power appliances (oven, dryer, space heater) are running simultaneously on the same circuit
• Wait 5 minutes after power restoration to allow the control board to fully reboot
• Open the dishwasher door and manually check for standing water inside the tub; if present, allow it to drain or manually remove it
• Press the cancel or reset button on the control panel if available to clear the error code
• Ensure the dishwasher door is fully closed and latched, as an incomplete latch can trigger error codes
• If error persists after reset, unplug the dishwasher and wait 24 hours before attempting to use it again, as some control board faults require a longer power-down period
