• Turn off power to the dishwasher by switching off the dedicated circuit breaker for 60 seconds, then turn it back on to perform a reset• Verify the under-sink water supply shut-off valve is fully open (turn counterclockwise)• Check that the dishwasher door is completely closed and latches firmly• Inspect the inlet hoses for kinks, pinches, or bends; straighten any kinked sections• Disconnect the inlet hose from the water supply and flush out any debris or mineral buildup into a bucket• Remove and rinse the inlet hose screens at both the water supply connection and dishwasher connection under running water• Verify water is flowing to your home by checking another faucet in the kitchen• Inspect the inlet hoses for cracks or splits and ensure all connections are hand-tight• Clean the dishwasher filter basket and spray arm openings to ensure water circulation is not blocked• Check that detergent type is appropriate for your water hardness and rinse aid is filled to proper level• Run a test cycle with the door closed to listen for water filling sounds during the initial fill phase
