Home Locations

Amana Refrigerator Error Code Air Filter Light

The air filter light indicates that the refrigerator's air filtration system requires attention, typically signaling that the air filter has reached the end of its service life or needs to be reset. This light alerts USA users that the air filter should be replaced or the filter status should be cleared to maintain optimal air quality and refrigerator performance.

Common Symptoms

• Air filter indicator light remains illuminated on the display panel • Light does not turn off even after closing and opening the refrigerator door • Reduced airflow from vents in the refrigerator compartment • Possible odors developing inside the refrigerator despite regular cleaning • Ice maker producing ice with reduced quality or unusual taste • Refrigerator compartment not maintaining consistent temperature • Light may blink intermittently or stay solid depending on the model year

Possible Causes

• Air filter has reached its recommended replacement interval (typically 6-12 months of use) • Air filter is clogged with dust, pet dander, or food particles restricting airflow • Air filter was recently replaced but the filter counter was not reset • Defective or misaligned air filter sensor preventing proper detection • Loose or improperly installed air filter cartridge • Electronic control board malfunction causing false indicator signal • Filter housing cover not properly secured after last filter replacement • Refrigerant circulation issue causing the system to prompt filter check as part of diagnostic sequence

Safety Checks You Can Do

• Locate the air filter in your Amana refrigerator (typically in the upper back wall or side wall of the fridge compartment) • Inspect the current air filter for visible dust, discoloration, or debris accumulation • If the filter appears dirty, remove it by pressing the release button or twisting counterclockwise depending on your model • Replace the old filter with a new Amana-compatible air filter rated for USA 120V operation • Ensure the new filter is installed firmly and clicks or seats completely into the housing • Locate the air filter reset button on the display panel or control board (consult your user manual for exact location) • Press and hold the air filter reset button for 3-5 seconds until the light turns off or the display confirms the reset • Close all refrigerator doors fully and verify the seal is tight and unobstructed • Check that nothing is blocking the air vents inside the refrigerator compartment • Unplug the refrigerator from the wall outlet for 60 seconds, then plug it back in to perform a full system reset • Allow the refrigerator 10-15 minutes to cycle before checking if the light has cleared • Verify your home's circuit breaker has not tripped and the outlet is providing power by testing with another appliance

Need More Help?

Our support team is available 24/7 to assist you with any technical issues