• Locate the air filter in your Amana refrigerator (typically in the upper back wall or side wall of the fridge compartment)
• Inspect the current air filter for visible dust, discoloration, or debris accumulation
• If the filter appears dirty, remove it by pressing the release button or twisting counterclockwise depending on your model
• Replace the old filter with a new Amana-compatible air filter rated for USA 120V operation
• Ensure the new filter is installed firmly and clicks or seats completely into the housing
• Locate the air filter reset button on the display panel or control board (consult your user manual for exact location)
• Press and hold the air filter reset button for 3-5 seconds until the light turns off or the display confirms the reset
• Close all refrigerator doors fully and verify the seal is tight and unobstructed
• Check that nothing is blocking the air vents inside the refrigerator compartment
• Unplug the refrigerator from the wall outlet for 60 seconds, then plug it back in to perform a full system reset
• Allow the refrigerator 10-15 minutes to cycle before checking if the light has cleared
• Verify your home's circuit breaker has not tripped and the outlet is providing power by testing with another appliance